Port Mode: This mode allows you to select the specific ethernet port (1-4) on the back of the Hitron that will provide the external IP address (note: The Hitron ports are not numbered but with the modem in the standing position, the port numbers are sequential with port #1 just below the reset hole and port #4 closest to the coaxial cable connection). Step 3 Click Status on the left side, and then you can see the MAC address on.
#Get the mac address for a ps4 from my router password
Step 2 Type the username and password in the login page, the default username and password both are admin. Click Save Changes, your new settings will be updated after a short wait and your preferred device should now be online. Step 1 Open the web browser and type the IP address of the router (default is 192.168.1.1) into the address bar and then Press Enter.Enter MAC address for your device that requires the public IP.Click the MAC option from the toggle button.MAC Address Mode: This mode allows you to specify the mac address of the specific device on your local network that should receive the public IP (generally a router connected via an ethernet cable). Select either the MAC or Port IP Passthrough Mode and follow the specific steps below: Once logged in, go to Admin in menu bar (see image above)Ĭlick IP Passthrough on the right of the submenu barĮnable IP Passthrough via the on/off toggle button.Password: Serial number on your Hitron modem.Log into Hitron web user interface by addressing your web browser to 192.168.0.1 and then entering the login credentials (default credentials shown):.Both options are described below and are enabled via the web user interface for your Hitron modem. IP Passthrough can be set to the MAC address of a specific device on your network or by assigning the passthrough to a specific ethernet port on the back of your Hitron (possible ports: 1-4).
If the 3rd party device is connected prior to setting up IP Passthrough then you may be required to powercycle to complete the process. Note: It is recommended to not connect your 3rd party router or access point until after IP Passthrough has been set up in the Shaw Modem.
0 kommentar(er)
